Blog posts tagged with 'hotels'

With any event that requires chairs, it helps to know the dimensions of the chair so an event coordinator or potential event client understands the amount of chairs to purchase or rent from a party rental company. This post will talk about the dimensions of a white resin folding chair; a popular chair used for indoor or outdoor events as a more budget friendly chair than Chiavaris.

White resin folding chairs have a chair width of 17.5" / 44.5 cm. They have a depth of 18.5" / 47.0 cm. If a potential client or event venue is looking to purchase chairs – below is a chart showcasing the number of chairs per row depending on the size of the room. This chart assumes a standard wedding ceremony setup with a 5 foot center aisle, 3.5 feet of walking room on the left and right sides of the room, 5 feet of walking room at the back of the room, 10 feet from the front row of chairs to the front of the room (for bride, groom and officiant standing room), 0" between each chair and 24" between chair rows (for walking / leg room).

In general, a good rule of thumb would be 2 white resin folding chairs for approximately every 3 feet of space.

Hopefully this post can be a reference point used by your clients or yourself when estimating the number of white resin folding chairs to be used for an event.

Chiavari Chair dollies are the easiest way to transport stacks of Chiavari chairs on and off of rental trucks and across event venue floors. While not a lot of assembly is required, there is still a few pieces to put together in order to begin using the Chiavari chair dolly. Here’s how to assemble a Chiavari chair cart:

What you should receive:

• (2x) Wheels
• (1x) Chiavari Chair Cart
• (1x) Axle
• (2x) Washers (*Note: not all carts will require both or any washers; the washers simply fill the extra space to prevent the wheels from traveling too much on the axle. The chiavari chair cart will still work effectively without them so use at your discretion.*)
• (2x) Cotter Pins

Tools Required (not included):

• Pliers
• Rubber Mallet

1. Check to make sure all parts are accounted for. The axle, cotter pins and washers should be taped to the Chiavari chair dolly (see picture below).

2. Take axle off the hand truck and flip the chiavari chair cart over so the axle holes are facing up.

3. Remove 1 of the cotter pins using the pliers and then both washers from the axle.

4. Slide the end of axle without the cotter pin through one wheel (air valve facing out).

5. Place washer after the wheel (if required).

6. Thread axle through the holes of the Chiavari chair cart near the bottom of the cart. If necessary, use a rubber mallet to hammer the axle through the holes.

7. Place second washer on axle without wheel (if required).

8. Put on second wheel (air valve facing away from washer).

9. Slide cotter pin in place and use pliers to bend one arm of the cotter pin.

10. Pull down Chiavari Chair shelf.

Congratulations! You’re ready to start transporting your Chiavari chairs.

We frequently get asked if people can pick up their orders to save on shipping. The answer is yes, you absolutely can come to our Mississauga Showroom/Warehouse or Delta, BC Warehouse and pick-up your order! Here are a few things to keep in mind to ensure that everything goes smoothly on your visit to the National Event Supply Showroom and warehouses.

1) If you want to pick up your order in Vancouver, you need to give us 24 hours notice.

Our warehouse in Delta (a suburb of Vancouver, BC) is a third party facility owned by Locher Evers International. National Event Supply doesn't have any staff at the facility and Locher Evers needs 24 hours to pull the products so that you can pick it up. If you show up at the warehouse without placing your order with us first, you will not be able to pick up the items that you want. That being said, we try our best to make our customers happy so if there is ever a rush situation of less than 24 hours, still give us a call. We will try our very best to ensure your able to meet your deadlines.

2) You can come and look at our products at our Mississauga Showroom before you place your order...

But it can take as long as 45 minutes to an hour for our warehouse staff to pull your order depending on how busy we are. If you know what you want, it's better to give us a call and let us know ahead of time so the warehouse staff can pull your order and so that we can get a start on preparing your paperwork. If you get to the warehouse and decide to change your mind after seeing our products, let us know and we'd be happy to change your order.

3) Make sure that the vehicle you're bringing is large enough for the products you'd like to pick-up.

Occasionally we get customers who order products for pick-up without really realising how large the products really are. Wood Folding tables and plastic folding tables that are five foot (60 inches) round or larger don't lay flat in the backs of van or SUVs or in the box of a pick-up truck. A box of 8 plastic folding chairs is over 3 feet long, is a foot and a half wide and is almost a foot thick. A box of 12 Quadrato Square Dinner Plates is about 1 foot by 1 foot by 1 foot. If you need to make 2 or 3 trips in your vehicle to get all of the products that you have purchased, you may find it more economical to just have the order shipped to you. If you aren’t sure your vehicle will fit your order, ask one of our customer service representatives! They are trained to calculate the dimensions of your order for shipping purposes and would be happy to send you the overall dimensions so you can make the appropriate accommodations for your order.

So now that you know you can pick up your order and get wholesale prices, what are you waiting for? We hope to see you soon!

When you receive your NES banquet chair dolly you will notice that there is minor assembly required (though it is less involved than the previously provided instructions for the NES Folding Chair Cart that we previously provided assembly instructions for). Below is a full run down of the pieces you should receive in your package as well as assembly instructions and tools that are required.

What you should receive:

• (2x) Pneumatic (airless) or solid wheels (depending on your purchase selection)
• (1x) Axle
• (2x) Washers
• (2x) Cotter Pins
• (1x) Hand Truck Frame

Tools Required (not included):

• Pliers
• Rubber Mallet

Step 1:

Check to make sure you have all of your parts. The axle is typically taped to the hand truck frame with the cotter pins and washers on it.

Step 2:

Take 1 cotter pin out and take both washers off of axle.

Step 3:

Put wheel on axle with the outside of the wheel against the cotter pin.

Step 4:

Place one washer on axle after the wheel. *Note: not all carts will require both or any washers; the washers simply fill the extra space to prevent the wheels from traveling too much on the axle. The banquet chair cart will still work effectively without them.*

Step 5:

Put axle on cart, hammer into place with a rubber mallet if required

Step 6:

Place second washer onto axle. Again the washer may not be required.

Step 7:

Put second wheel onto the axle.

Step 8:

Put cotter pin back into place, bend one end to hold in place.

Well done! Your cart is now complete! Enjoy the fruits of your labour by quickly and easily moving your banquet chairs.

Special Event supply is our bread and butter. Special event rentals is yours. We hope our products in your inventory are generating lots of revenue for you all this Canada Day.

We will be back tomorrow with more great content! Have a safe and enjoyable holiday!