Blog posts tagged with 'party rental'

The annual CRA Ontario Golf Tournament was held September 15, 2011 at Trehaven Golf Club in Hawkstone, Ontario. The shotgun `bestball` tournament started at 11:00 am with members and suppliers teeing off from every hole on the course. The tournament was a great opportunity to raise some funds for the CRA Ontario Association as well as celebrate the 50th anniversary of the establishment of the CRA Ontario local. CRA Ontario was the first local to be established in Canada for the Canadian Rental Association.

Attending the Golf day from National Event Supply were myself, Jonathan Heathcote and Bill Winslade. We had the pleasure of golfing with Andrew Paquette the Chairman of the Canadian Rental Association and recently Past-President of the CRA as well as Past Executive Board Member of the American Rental Association. Andrew is also the President of Bravo Location Rentals in Montreal, Quebec. While the weather was somewhat co-operative for the day, we did get a little wet on a couple of holes. We were very fortunate that Andrew remembered to bring his extra-large golf umbrella so that all 4 golfers could keep dry in between shots. We had a great time throughout the day and were thankful to have Jonathan in our foursome otherwise we would had a much higher score than our 8 over par.

The highlight shot for the day occurred on the 167 yard par 3, - 18th hole. Jonathan put us close to the green with a great drive shot that was pin high and about 20 feet off to the right of the green. We then had about a 50 ft shot to make the hole. Andrew was 2nd up on the hole and proceeded with a great chip the landed on fly onto the green, hit the pin and dropped in for a Birdie.

After golf everyone enjoyed a great steak dinner and some libations. The day was wrapped up with the presentation of numerous awards to some of the more successful golfers, awarding of the raffle prizes and speeches from Mike Maltby, the President of CRA Ontario and Wayne Beckett, the President of CRA. We would also like to extend our personal thanks to Wayne who travelled all the way from Moosomin, Saskatchewan and Andrew who flew in from Montreal to attend the Golf tournament and help celebrate the 50th CRA Ontario Anniversary.

Next year’s CRA Ontario tournament is tentatively scheduled for Wednesday, September 12th, 2012 at the Nottawasaga Inn Resort & Conference Centre in Alliston, Ontario. We look forward to seeing everyone there!

A question we frequently get asked is how to tell the difference between a good quality plastic folding chair and one that can't handle the rigours of the rental industry.

One of the best ways to figure out if you are buying a good quality plastic/poly folding chair is to take a firm hold of the seat back with your hands and to give it a twist. The seat should have some give and flex under the pressure as you twist the seat back. If it feels too rigid, there is a good possibility the chair you have selected has too much recycled plastic in it and will therefore be ‘brittle’ and very susceptible to breaking under many different conditions. Breakage will occur when the weather in the northern parts of the US and Canada gets colder or when the chairs are handled a little more roughly.

Since we often cannot wait until winter sets in to check to see how the sample chair performs in sub-zero weather, you can perform a quick and easy test on a sample chair. The hammer test is the easiest way to make sure that they chairs you are looking at use virgin plastic. I must admit I have to give credit to one of our customers, Parkland Party & Equipment Rentals in Red Deer, Alberta for telling me about this particular test. All you need is a typical 16 ounce hammer and the sample plastic folding chair you wish to test for long term durability. Give the back of the seat on your sample plastic folding chair a few whacks with the hammer. If your sample poly folding chair breaks, you know it isn’t a good long-term buy.

If you are looking for a cost effective, lightweight, but durable and reliable chair that will support the majority of people that attend weddings, concerts, parties, business meetings and the like, then our NES RELIABLE Plastic Folding Chairs are the ideal solution. These chairs have been stress tested to support a 225lb drop test from 6 inches above the chair and do not fail. In addition, they contain only virgin plastic with a high tensile steel frame that will provide many years of use and enjoyment for your business. In addition, our NES RELIABLE Plastic Folding Chairs come with a 2 year material and manufacturing defect warranty. These have been an excellent performing chairs for all our customers.

We are currently stocking 7 main colours: Black seat and back on a Black frame, White on White, Burgundy on Grey. Grey on Grey, Tan on Tan, Brown on Tan and Slate Blue on Grey.

It's been a busy day here at the National Event Supply warehouse. We took delivery of our first container early this morning and we're just starting to empty our second container this afternoon. It's great to finally have the products that everyone is looking for.

Our first container was a mixture of Plastic Folding Tables and Plastic Folding Chairs. We've managed to replenish our supply of Burgundy on Grey Plastic Folding Chairs as well as increase our stock of Black on Black Plastic Folding Chairs to help us get through the summer. In addition, we brought in some 5-ft NES Reliable Rectangular Plastic Folding Tables, allowing us to add it to our regular price list of available items.

Our second container arrived earlier this afternoon. It was filled with 5-ft round, 6-ft rectangular, and 8-ft rectangular plastic folding tables. Unfortunately, we only brought in 120, 5-ft round tables on this container. This means that after filling our back-orders we will have 1 or 2 tables left. We are getting more 5-ft round tables in early August, so if you are interested in the tables and can wait, please drop us a line and we will put your request into our backorder file.

That's it for today. The warehouse team is resting up for one last container this month. Tomorrow we'll be adding more Plastic Folding Chairs to add to our inventory. This last container will be the ninth container of products that we have received this month. We should have another two or three containers in the coming weeks filled with resin Chiavari chairs, porcelain, and cutlery.

Happy Belated Father's Day to all you dads out there. I don't know about you, but I spent Father's day in a restaurant in the company of friends as my family is scattered all over the country. The restaurant we were at was following a trend which we've noticed at National Event Supply: Rectangular Dinner Plates. A 7"x14" Platter makes the perfect plate for a burger or sandwich and fries. This is a trend that we can see continuing for quite a while.

Our Rectangular 7"x14" platters are just one of the items that are back in stock as of this morning when our shipping team unloaded our container of porcelain. This is one of the more difficult containers for our shipping team as there are hundreds of heavy boxes filled with breakable items packed into the container in no discernable order. By the time they get all the boxes onto the proper pallets, and then put the pallets away in the warehouse, they're ready for a break.

Our sales team has started calling customers that have porcelain back orders to let them know that we can fill their orders starting today. If you've been waiting for porcelain platters, bowls, or dinnerware now is the time to let us know. Our sales team would be happy to put together a quote for any items that you are interested in. In addition, if you're interested in seeing a sample of our commercial grade porcelain, we'd be happy to send you a free sample of our Hotelier Dinnerware.

We've got two more containers coming in this week for sure. One will add some chairs to our inventory to help us make it through the summer, while the other contains Plastic Folding Tables. It's going to be a busy week here at National Event Supply!